Msd 8251 Pro Power HVC Coil, Use w_MSD 7 Series Instal Manuel d'utilisateur télécharger pdf

M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4

ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered

in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product

will help if there is ever a warranty issue with your product and helps the MSD R&D team create

new products that you ask for! Go to www.msdperformance.com/registration.

WARNING: Very high voltages are present at the coil when the engine is running. Never connect

any test equipment or touch the coil while the engine is running.

WARNING: Disconnect the battery during installation. When disconnecting the battery, always

remove the negative cable ﬁrst and install it last.

MSD Pro-Power HVC Coil

PN 8251

The Pro-Power HVC Coil is designed to be used with an MSD 7, 8 or 10 Series Ignition Control

only.

INSTALLATION

1. The Coil can be mounted in any position, but should be away from direct heat sources. Use the

Coil as a template and mark the location of the mounting holes.

Use an 1/8” bit to drill the holes.

2. Install the supplied vibration mounts to the coil and install the coil. Also install one end of the 4"

Black wire between a vibration mount and the bracket. Connect the other end to ground.

Note: The supplied star washers must be used on both sides of the ground wire ring lug terminal.

This ensures proper grounding through the anodized brackets.

3. The MSD Orange wire connects to coil positive(+). Black connects to coil negative (-). There are

two options when connecting the coil:

• Use the supplied 45° Blade terminals to connect the MSD Ignition wiring.

• Install the supplied 2-pin harness and connect the matching 2-pin connector to the ignition's

wiring.

4. Connect the coil secondary wire to the coil and distributor cap.

Parts Included

1 - Pro-Power HVC Coil 2 - Rings Lug Terminals

4 - Vibration Mounts 2 - Nuts & Washers

1 - 2-Pin Weathertight Connector and Harness 2 - 45° Blade Terminals

1 - 2-Pin Weathertight Connector Assembly 2 - Spade Terminals

1 - 4" Black Wire 2- Star Washers

ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered

in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product

will help if there is ever a warranty issue with your product and helps the MSD R&D team create

new products that you ask for! Go to www.msdperformance.com/registration.

•

1 2

Résumé du contenu

Page 1 - MSD Pro-Power HVC Coil

M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4ONLINE PRODUCT REGI

Page 2 - Limited Warranty

Wiring to an MSD 7AL-3INHIBITRASOUTPUTRASIGNTACHSTARTRETARDPNTSM+M-RET #1RET #2RET #3RET #4LAUNCHBURNOUTCOIL +TRIG DIAGCOIL -BATT -BATT +TMTO BATTERYN

Commentaires sur ces manuels

Pas de commentaire

Msd 8251 Pro Power HVC Coil, Use w_MSD 7 Series Instal Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Msd 8251 Pro Power HVC Coil, Use w_MSD 7 Series Instal. MSD 8251 Pro Power HVC Coil, Use w_MSD 7 Series Installation User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Msd 8251 Pro Power HVC Coil, Use w_MSD 7 Series Instal