Msd 8728 Soft Touch Rev Control Installation Manuel d'utilisateur télécharger pdf

Soft Touch Rev Control

PN 8728

WARNING: During installation, disconnect the battery cables. When disconnecting the battery,

always remove he Negative cable ﬁrst and install it last.

Figure 1 Selecting the Number of Cylinders.

Figure 2 Installing the Vibration Mounts.

M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4

ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered

in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product

will help if there is ever a warranty issue with your product and helps the MSD R&D team create

new products that you ask for! Go to www.msdperformance.com/registration.

Note: This Soft Touch Rev Control, PN 8728, is designed for inductive style ignition systems only. It

cannot be used with an MSD Ignition Control!

Parts I ncluded:

1 - Soft Touch Rev Control

4 - Mounting Pads and Sleeves

4 - RPM Modules, 3,000, 6,000, 7,000, 8,000

4 - Wire Splicers

4 - Self Tapping Screws

4 - Wire Insulating Caps

Note: The RPM limit is set with plug-in rpm modules. If an rpm module is not installed, there will be

no rpm limit.

CYLINDER SELECT

The Soft Touch Rev Control comes from MSD

programmed for 8-cylinder applications. It can

easily be adjusted for operation on other en-

gines by cutting the cylinder select wire loops

(Figure 1). If the loops are cut, use the supplied

insulating caps to seal the wire ends.

MOUNTING

The Rev Control can be mounted in the engine

compartment but away from direct heat sources. It is recom-

mended to mount it where the rpm module is easy to access

for rpm adjustments. Make sure all of the wiring reaches their

connections. Once a suitable mounting location is determined

mark the location of the mounting holes by using the unit as a

template. Remove the unit and use an 1/8” bit to drill the holes.

Install the supplied mounts and use the four self tapping screws

to secure the Control (Figure 2).

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Soft Touch Rev Control

Soft Touch Rev ControlPN 8728WARNING: During installation, disconnect the battery cables. When disconnecting the battery, always remove he Negative ca

Page 2 - 2 INSTALLATION INSTRUCTIONS

2 INSTALLATION INSTRUCTIONSM S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7

Page 3 - INSTALLATION INSTRUCTIONS 3

INSTALLATION INSTRUCTIONS 3M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7

Page 4 - 4 INSTALLATION INSTRUCTIONS

4 INSTALLATION INSTRUCTIONSM S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7

Page 5 - INSTALLATION INSTRUCTIONS 5

INSTALLATION INSTRUCTIONS 5M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7

Page 6

6 INSTALLATION INSTRUCTIONSM S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7

Page 7 - Tech Notes

INSTALLATION INSTRUCTIONS 7M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7

Page 8

Tech Notes_______________________________________________________________________________________ ___________________________________________________

Commentaires sur ces manuels

Pas de commentaire

Msd 8728 Soft Touch Rev Control Installation Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Msd 8728 Soft Touch Rev Control Installation. MSD 8728 Soft Touch Rev Control Installation User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Msd 8728 Soft Touch Rev Control Installation