Msd 8401 Modified HEI Coil Dust Cover V8 Installation Manuel d'utilisateur télécharger pdf

HEI Dust Cover Conversion

for a Blaster 2 Coil

PN 8401

WARNING: During installation, disconnect the battery cables. When disconnecting the battery,

always remove the Negative cable ﬁrst and install it last.

Parts Included:

1 - MSD HEI Dust Cover

1 - Y-spliced Pink Wire

1 - Brown Wire

The PN 8401 Dust Cover allows the use of an external Blaster 2 coil with an internal coil GM HEI

distributor.

INSTALLATION

1. Disconnect the 3-pin wiring harness and the single Pink wire connector from the distributor cap.

2. Remove the dust cover from the original coil and remove the internal coil.

Note: Leave the rotor bushing in place.

3. Install the MSD Dust Cover using the original screws.

4. Connect the supplied Brown wire to the Brown wire of 3-pin distributor connector. Connect the

other end of the Brown wire to the coil negative (-) terminal.

5. Connect the supplied Y-Spliced Pink wire to the single Pink wire (switched 12 volts) and the Pink

wire of the 3-pin distributor connector. Connect the other end to the coil positive (+) terminal.

Note: The middle terminal of the 3-pin connector (Black wire) is not used.

6. Install the coil wire to the Cover.

Note: If you plan to install a tachometer, the trigger wire connects to the coil negative terminal.

Figure 1 Wiring Diagram.

M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4

1 2

Résumé du contenu

Page 1 - HEI Dust Cover Conversion

HEI Dust Cover Conversion for a Blaster 2 CoilPN 8401WARNING: During installation, disconnect the battery cables. When disconnecting the battery, alwa

Page 2 - TECH NOTES

Limited Warranty MSD warrants this product to be free from defects in material and workmanship under its intended normal use*, when properly installe

Commentaires sur ces manuels

Pas de commentaire

Msd 8401 Modified HEI Coil Dust Cover V8 Installation Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Msd 8401 Modified HEI Coil Dust Cover V8 Installation. MSD 8401 Modified HEI Coil Dust Cover V8 Installation User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Msd 8401 Modified HEI Coil Dust Cover V8 Installation